Knowledgebase > HelpDesk > Knowledgebase

Ask a question:

I8000 & SC01B special instructions


SC01B & I8000 unlock instructions in case of trouble

Normal manual:

1. Download from support servers
    a. 'Start' -> 'Programs' -> 'Simlock Remote client'-> start Samsung Remote unlock client -> login -> select model -> Press 'Go Support'
    b. Go to folder 'Samsung Drivers' and download '' to your computer

2. Unzip DataConnection.exe to MMC card
3. Run 'dataconnection.exe' via phone explorer. - and select phone usb
4. Uninstall Active Sync software and disable / uninstall any other sync software that might interfere with the phone connection (e.g. PC studio Software)
5. Type *#7284# then choose USB > Modem (or USB > Phone)
6. Type: *#9090# then choose - [1] Uart_null_usb_diag (Sometimes options differ a little always choose an option with 'usb_diag')
7. Set your phone in Active Sync mode (connection mode)
8. Connect your phone to your computer with the microUSB cable
9. Start 'Samsung Remote Client'
10. Login with your SRS username and password
11. Select your phone model
12. Press 'rescan'
13. Click 'direct unlock' and follow instructions when needed.
14. done

If you have trouble please check drivers in Device Manager. Sometimes the 'rescan' doesn't work properly because built-in modems on your computer and you have to set the Com Port number manually, in your Device manager you need the 'Samsung DIAGPORT under 'Modems' or under 'Ports'.

Was this article helpful? yes / no
Article details
Article ID: 16
Category: Unlock-by-cable
Date added: 2011-10-21 09:01:37
Views: 290
Rating (Votes): Article rated 3.7/5.0 (9)

<< Go back